Used 2017 Koike Aronson Automatic Girth Welders, DC-600

This equipment is in storage and available for immediate delivery.

-WELDS THE HORIZONTAL SEAM AROUND A TANK WITH SAW PROCESS. INCLUDES ALL NECESSARY EXCEPT FLUX AND WIRE TO BEGIN WELDING

-INCLUDES: OPERATOR'S PLATFORM WITH SEAT; LINCOLN NA-3 WIRE FEEDER AND CONTROL

-LINCOLN DC-600 POWER SOURCE; VERTICAL ADJUSTER; HORIZONTAL ADJUSTER; FLUX BELT ASSEMBLY

-FLUX RE-CIRCULATING SYSTEM; LINCOLN TINY TWIN WIRE KIT; PRE-HEAT TORCH; SERVICE SKID WITH MAIN DISCONNECT

-TROPICALIZED CONTROLS; WEATHER CURTAIN SET; GLOBE WORK LIGHT MOUNTED ABOVE WORK AREA

-200 FEET OF CONTROL CABLE ASSEMBLY; LOADING SAFETY WHEEL SET; OPERATORS MANUAL; TOOL KIT

-SPECIFICATIONS: ADJUSTABLE TUBULAR FRAME FOR PLATES 6ft TO 10ft TALL (1.8m-3.05m)

-MIN. 20ft (6.1m) TO AN UNLIMITED TANK DIAMETER RANGE; TRAVEL SPEEDS 4-105 IPM (.10-2.67 m/min)

-SPEED, DIRECTION AND RAPID TRAVEL SELECT CONTROLS 750 LBS. WEIGHT CAPACITY

-AVERAGE WELDING SPEED IS APPROXIMATELY 30 IPM (.762 m/min) WITH A DEPOSITION RATE OF 1 1# PER